Wall mounted folding table

follow me on my Facebook page

and never miss anything

https://www.facebook.com/fromadreamtodiy

When i first started this blog, i dedicated to all the renters in Kuwait who are facing space problems in their homes. i know that pain as i go through it as well. So here is a good replacement to something that has been a must in every home and yet taking the most space.

A wall mounted table.

The best thing about DIYing is you can customize the hell out of it literally :D

no this table cab replace your dinning table if you build it in a larger size, so much space saved aswell as bar-look is obtained. in my case i replaced study table with this. 

Remember my last blog where i turned a nightstand into a chair....

If missed, you can check the complete tutorial HERE

I didnt give this chair a back and i told you that the reason will be explained in my next blog, so the reason is behind this chair is the wall mounted table, and whenever I've to use it i just drag the chair out open the table and use it.

I saw this table in Ikea and it costed 12 kd, i made mine for less than half, 3kd ONLY!!!

Here is a list of material:

4 pieces of 12mm thick plywood, cut according to your requirement

mine measured:

A. 20x50

B. 4x50  ( yes its 4, a really thin strip)

C. 40x50

D. and lastly a right angle triangle piece measuring 30x20

screws'

hinges

wood glue

and some paint.

Assembling:

Screw the small hinge on the piece A and D

Ignore the nail... use screws.

Attach the piece A directly to the wall with the help of drill and screws and their friend fisher :p

If you're a beginner ask for some manpower from your family :)

Screw the longer hinge on the edges of piece C and B.

Apply some wood glue and  nail the piece B on top of the piece A

this is what it looks like (without paint ofcoarse)

Raise the table top

open the heroic support.

BOOM! there you go, a nice place to work on or have a meal :)

This whole chair and table project was for my hubby :)

LOVE HIM TO BITS :)

A good picture again.

Technical details:

the piece B's width was kept this size because its connected to the wall hanged piece A, the piece C is also connected to it, lastly, its wide enough to have the folded support  under it.

Do this in your homes and save loads of space, and yes send me a picture too, i love to see creativity flowing in from everywhere :)

KEEP DREAMING...

KEEP DIY-ING...

XOXOXOXOX